Light Package (Full)

Full set Controller, Landing Light, 2 x Red, 2 x White and 1 x Green light

The BrainCube controller is a high performance microprocessor, remotely operated LED driver and light sequencer.
Containing an integral high voltage, high current switching power regulator to drive the various outputs for navigation, landing and strobe lights.
The self contained controller will covert the input voltage into the required 5v supply and can supply up to 4A of current.
All battery type are supported.
LED supply (6 – 42 volt range) is isolated from the receiver power for protection.
Easy to set up to match your transmitter operation.

10 pre-programmed patterns - flash, strobe and beacon.
1, Long Flash Long Flash
2, Double Flash Double Flash
3, Short Flash Short Flash Out of Phase
4, Short Flash Double Flsh
5, Long Flash Double Flash
6, Rotating Beacon Double Flash
7, Double Rot. Beacon Long Flash
8, Rotating Beacon Rotating Beacon Out of Phase
9, Long Flash Double Flash
Nav lights pulse off (RAF Hawk)
10, Double Rot. Beacon Rotating Beacon Out of Phase

Technical Specifications.

Receiver Supply Voltage 4v to 13 Volts
Receiver Supply Current Draw 100 mA
LED Supply Voltage 6 to 42 Volts
LED Power Output 5V, 4A MAX
Dimension - Case 68 x 30 x 19
Weight 35.8 g

LED module

Metal housed LED, available in Red, Green and White.
Supplied with 125mm cable and 2 pin connector.
Main body diameter 8.00 mm
Head diameter 11.00 mm
Lens diameter 8.00 mm
Body length 26.50 mm

Landing Light Modules - Large & Small supplied with 300mm cable
((Choose size option.))
Large housing diameter LED, available in White.
Main body diameter 24.00 mm
Lens diameter 20.00 mm
Body length 14.00 mm

Small housing diameter LED, available in White.
Main body diameter 12.00 mm
Lens diameter 8.00 mm
Body length 12.50 mm