New Hi Flow fuel clunks ( comes with felt! ) Hi-Flow Felt inner. Replace the std inner with restrictive small hole, with these Hi-Flow large bore...
New Hi Flow fuel clunks ( comes with felt! ) Hi-Flow Felt inner. Replace the std inner with restrictive small hole, with these Hi-Flow large bore...
M&R Special 6oz bubble trap for 60-250N turbines. Larger capacity gives greater reserve still with a breathable bottle to warn of restrictions....
.JPG "MAP 250-320N Bubble Trap 6oz twin tanks")
New 6oz 220-310N bubble trap Conformal twin tanks only-Two equal fuel tanks feeding bubble trap. Mount horizontal in fuselage*
MAP Hi-Flow Bubble Trap Tank (4 oz) Works mounted horizontal or vertical For all turbine sizes. - This air trap can be installed in any position,...
MAP Mini Bubble Trap Tank (2 oz) Half the size as a UAT, mount horizontal. For all turbine sizes. 20-100N - This air trap can be installed in any...
MAP Std Bubble Trap Tank (4 oz) Works mounted horizontal. For all turbine sizes. Works best mounted at an angle as air is purged from nipples as it...
Ground tank-catch overflow fuel-a must for twin tank set ups to allow fuel to balance fully. Taxi tank allows you to start the turbine, hold and...
Tidy Clips - 4mm tube size (pk8)
Tidy Clips - 6mm (pk8) Suits 6mm clear and Tygon tube.
Brass overflow insert with O rings. Plugs into Pilot Flush overflow fitting to allow ground tank use Brass insert only supplied-order PIL030 for main...
Best of the best Bondhus Allen key set with short arm for maximum tightening torque and reduced twist. A must for Undercarriage set screws! 1.5, 2.0,...
M3 Spring steel clevis German made (pkt10)
Tube expander safely stretches common 6mm clear tube for fitting over barbed fittings like MAP bubble traps. Also sized for 8mm clear and...
Tygon Fuel Tube 3.2mm (1/8") ID 6.3mm (1/4") OD 3’ 36” pack. Genuine Tygon! Perfect for 20-200cc petrol and Jet clunk lines P-20-P-220rxi (twin...
SPECIFICATIONS V2 version Dead band: 2µs Working frequency: 1520µs / 330hz Motor: Brushless Motor Gearset: Full Metal Spline: 25T Operating...
20ltr fuel caddy with high flow fittings/felt clunk pick up. Prolux reversible fuel pump-features built in battery 1 available August 24
6mm Surethane Jet Fuel Tubing (2m) 6mm OD with a 4mm ID Better than Festo tube. As supplied with JetCat turbines. Use for all plumbing outside fuel...
88mm dia (I/d) tail pipe cut with angled outlet which could be trimmed off square. Max length 425mm Min length cut square 385 Outer pipe 110mm dia
JetCat turbine oil. Already includes anti static fluid. One bottle added to 20ltr fuel station correct ratio for 99% of turbines. JetCat oil is...
20cm 2s Balance lead extension JST-XH (Overlander etc)
