PowerBox-Systems

We have worked with Powerbox from the beginning, sold more products than any other UK dealer. If you want to do it right contact M&R and speak to Dave Need to use extra servos on a big or fast model? Running extra long servo leads? Need the security of two batteries? Want two batteries and a fail-safe switch?

Powerbox units feature powerful servo amplifiers and screening from interference. Dual circuits throughout- no corner cutting. The Switch only units allow Li-Po cells (built in regulators) to be used for long flying sessions-more flights/mAh than Ni cells.

Powerbox units, Sensor Switch, Gemini Switch and all PB units give 5.9v which is perfect for all servos including JR Servos. Only unregulated 5N cell packs should not be used on JR servos as fully charged these are over 7.0v.

Powerbox also have their own user forum Click here
(image for) Powerbox Leads-specials and soldering service

Powerbox Leads-specials and soldering service

We have many special and one off Powerbox leads and offer a soldering service to adapt and extend/shorten leads. Call 01923 270405 or email for...
(image for) Powerbox Source

Powerbox Source

Features High performance Optimised cooling Small size Optional OLED screen, 128 x 64 pixels Four different output voltages Suitable for use with all...
(image for) Powerbox sports Cap

Powerbox sports Cap

Powerbox sports cap
(image for) Powerbox Unit Sensor Switch Mount

Powerbox Unit Sensor Switch Mount

Raise mount for aluminium Sensor switch Mercury SR2/Competition SR2 etc (Switch not included)
(image for) Powerbox V3 Sensor Switch Unit Mount

Powerbox V3 Sensor Switch Unit Mount

Raised mount for V3 regulated Sensor Switch Easy wire routing through mounting plate
(image for) PowerPak 2.5 X 2 Pro 7.4v Nominal

PowerPak 2.5 X 2 Pro 7.4v Nominal

Features Integral charge / security electronics (PRO version) Can be charged using mains PSU or 12 V adapter (PRO version) Integral voltage monitor...
(image for) PowerPak 2.5 x 3 Pro

PowerPak 2.5 x 3 Pro

Battery type LiIon Capacity 2500mAh Nominal voltage 11.1V Final charge voltage 12.6V Charge voltage 10V - 17V Weight 191g Weight, mounting frame 8g...
(image for) PowerPak 5.0 x 2 Pro

PowerPak 5.0 x 2 Pro

Battery type LiIon Capacity 5000mAh Nominal voltage 7.4V Final charge voltage 8.4V Charge voltage 10V - 17V input Weight 235g Weight, mounting frame...
(image for) Screen for PowerBox Royal SRS and Champion SRS

Screen for PowerBox Royal SRS and Champion SRS

Replacement screen for PowerBox Royal SRS and Champion SRS Includes lead and mounting screws
(image for) Sensor Switch V3 surface mount

Sensor Switch V3 surface mount

Easy install mount for the Powerbox Sensor Switch V3.
(image for) Spark RS. Unregulated 6601

Spark RS. Unregulated 6601

The SparkSwitch RS is a compact, high-performance ignition switch featuring rotational speed (RPM) monitoring and optional voltage regulation for 6V...
(image for) Spark RS. Unregulated 6601

Spark RS. Unregulated 6601

The SparkSwitch RS is a compact, high-performance ignition switch featuring rotational speed (RPM) monitoring and optional voltage regulation for 6V...
(image for) Temperature probe for SparkSwitch Pro and PBS-T250

Temperature probe for SparkSwitch Pro and PBS-T250

Temperature probe up to 250°C for the SparkSwitch Pro and PBS-T250.
(image for) The PowerExpander SRS with MPX

The PowerExpander SRS with MPX

Features Access to a maximum of eighteen channels Simple wiring: the receivers are connected using a serial link Integral SRS, allowing the use of...
(image for) Tx support arms (Pair)

Tx support arms (Pair)

Carbon supports arms and fixing screws for Core Use with or without side extensions
(image for) Voltage sensor V-60

Voltage sensor V-60

currently on the market. The sensor is simply plugged into the receiver’s Telemetry input socket. A cable is supplied for connection to the...
(image for) VRegulator 6.0v

VRegulator 6.0v

The V-Regulator is a compact, high-performance voltage regulator which is ideal for any model where standard servos are to be operated in conjunction...
(image for) Y Lead (2) Short servo Y lead

Y Lead (2) Short servo Y lead

9194 2pcs Short Powerbox Y lead
(image for) Battlife Guard 2s (7.4v)

Battlife Guard 2s (7.4v)

The Battlife Guard has been developed specifically for use with 2S and 3S Li-Ion and LiPo batteries. This little unit is very simple to use, and can...
(image for) Battlife Guard 3s (11.1v)

Battlife Guard 3s (11.1v)

The Battlife Guard has been developed specifically for use with 2S and 3S Li-Ion and LiPo batteries. This little unit is very simple to use, and can...
(image for) MPX Mounting flange (Female end-small) (pkt 6)

MPX Mounting flange (Female end-small) (pkt 6)

In stock NEW: Mounting frame for MPX female connectors The PowerBox MPX mounting frames are a new design, and accurately accommodate all M6 and MPX...
Copyright Motors and Rotors